Drivers · free & open · no paywall

RTI drivers that just work.

Open two-way drivers for RTI Integration Designer. No licence keys, no 15-minute trials, no email-us-your-MAC. Download, load, done.

UDP Toolkit

v0.2 · XP-8 · UDP/IP + Kramer auto-switch

General-purpose UDP/IP driver: 50 command slots, 80 feedback patterns (boolean / integer / string / enum), a browser test page on :9032, and a Kramer Protocol 3000 auto-switch module that routes the most recently connected source to your outputs — last-in-wins, up to 64×64 (VS-1616DN / VS-3232DN / VS-6464).

HDMI auto-switch the moment a source is plugged in
50 macro-fired UDP commands (ASCII or hex)
80 feedback patterns written to system variables
Live browser test and capture page on port 9032

Download ZIP .rtidriver only Source

Heads-up — pre-release. This build is community-packaged and verified to unpack correctly, but hasn’t yet been load-tested on a live processor. Turn on Enable Trace in Driver Properties when you try it. If anything’s off, the source bundle packages cleanly with RTI’s own PackageDriver.exe.

TCP Toolkit

v0.2 · XP-8 · TCP/IP (Telnet-style)

General-purpose TCP/IP driver for AV gear: a persistent connection with auto-reconnect and an optional connect handshake (Epson ESC/VP.net and the like), 50 command slots, 80 feedback patterns, and a browser test page on :9031. Same optional Kramer auto-switch module.

Persistent connection with auto-reconnect
Connect handshake for protocols that need a greeting
50 macro-fired commands (ASCII or hex) plus 80 feedbacks
Telnet-style gear: Epson / Sony projectors, Lumagen, matrices

Download ZIP .rtidriver only Source

Heads-up — pre-release. Community-packaged and verified to unpack correctly, but not yet load-tested on a live processor. Turn on Enable Trace when you try it; the source bundle also packages cleanly with RTI’s PackageDriver.exe.

Install

1Pick a driver above, download its ZIP, and unzip it.
2In Integration Designer, open Drivers · Add Driver · From File and pick the .rtidriver.
3Add it to your XP-8 and set Driver Properties — Host and Port, plus the Kramer Auto-Switch options (UDP) or the receive framing and connect handshake (TCP) for your device.
4Download to the processor and run it.

Full notes — quick-start, macro functions, system variables, the web test page and troubleshooting — are in IntegrationNote.md inside each ZIP.

Free RTI drivers, built in the open. Kramer and RTI are trademarks of their respective owners; this project is independent and unaffiliated.